Carrier Access Access Navigator - Manual (Page 366)

15-24 August 2003 Access Navigator - Release 1.8
Diagnostics & Troubleshooting
Status ISDN CRV
Message:
CRV Chan Status Call Status
--- ---- ------ -----------
1 B1 In Service Active
1 B2 In Service Active
1 D In Service n.a.
2 B1 In Service Idle
2 B2 In Service Idle
2 D In Service n.a.
3 B1 In Service Idle
3 B2 In Service Idle
3 D In Service n.a.
4 B1 User set Out of Service
4 B2 User set Out of Service
4 D User set Out of Service
Description:
Item Description
CRV Call Reference Value, 1 to 768
Chan B1 – Bearer channel 1
B2 – Bearer channel 2
D – Signaling channel
Status The following states may appear:
Not Assigned
Not Assigned to ISDN
Not Available
In Service
User set Out of Service
Switch set Out of Service
Under user test control
In Loopback
Card not Installed
Facility failure
DS0 is not a drop side GR303 channel
DS1 Out of Service
Call Status The following states may occur when CRV is In Service:
Active – Call in progress (off hook)
Idle – Line available (on hook)
Permanent – Line not available because of permanent off-hook
state
n.a. – not applicable