Carrier Access Access Navigator - Manual (Page 475)

Access Navigator - Release 1.8 August 2003 18-19
CLI Language Reference
Login with User Name Required
Login with User Name Required
If there is at least one user defined, the startup will include a “Login:” message similar to the
following.
Carrier Access Corporation Access Navigator
08:30:45 11/30/1998
Login:
To login, type your user name and press the Enter or Return key. User names are not case sensitive. In
the following example, the user name is smith.
Carrier Access Corporation Access Navigator
08:30:45 11/30/1998
Login: smith
If the user name is incorrect, the “Login:” message will be repeated.
Login with No Password Required
If no password is required, the command prompt will appear immediately after entering your user name,
as shown below.
Carrier Access Corporation Access Navigator
08:30:45 11/30/1998
Login: smith
SystemID>
Login with Password Required
When a password is required, a “Password:” message will appear as shown below. This means that you
must enter your password and press the Enter or Return key. As you type the password, the CLI will
display asterisks. Passwords are case sensitive, so upper and lower case letters are different.
Carrier Access Corporation Access Navigator
08:30:45 11/30/1998
Login: smith
Password:******
If the password is incorrect, the “Login:” message will be repeated.