Carrier Access Access Navigator - Manual (Page 517)

Access Navigator - Release 1.8 August 2003 18-61
CLI Language Reference
CLI Command List
TMC primary 25:24 Follows DS1 term ID
TMC secondary 29:24 Follows DS1 term ID
Remote configuration ON No effect unless FDL is
set to cac
Remote connections All voice and GR-303 type
DS0s are initially connected
to FX card analog lines:
Card 1, lines 1-12
Card 2, lines 13-24 DS0 channels are always
connected to the
corresponding FX line
numbers.
Remote identifier Remote Device #n n = DS1 number
Remote T1drop linecode B8ZS Preferred for data
Remote T1drop framing ESF Required for FDL
Remote T1drop line buildout 1 DSX-1, 0-133 ft.
Remote T1drop PRM ATT AT&T 54016
Remote V.35 CTS HIGH
Remote V.35 receive clock source INTERNAL
Remote V.35 clock inversion NONE
Remote V.35 data NORMAL No data inversion
Remote RS-232 baud rate 9600
Remote RS-232 data bits 8
Remote RS-232 parity NONE
Remote RS-232 stop bits 2
Table 18-2 Default Settings (Continued)
Parameter Default Comments