Carrier Access Access Navigator - Manual (Page 367)

Access Navigator - Release 1.8 August 2003 15-25
Diagnostics & Troubleshooting
Status EOC
Status EOC
Displays detailed EOC service status message.
Syntax: status eoc
Message:
EOC Status:
Primary
Channel: DS1 #25 channel 12
Link Status: Up
Mode: Active
Secondary
Channel: DS1 #29 channel 12
Link Status: Up
Mode: Standby
Description:
Status TMC
Provides detailed TMC service status message. Use clear commands to reset the Blocked Call Count,
Peak Call Count, and Permanent Call Count.
Syntax: status tmc
Message:
TMC Status:
Primary
Channel: DS1 #25 channel 24
Link Status: Up
Mode: Active
Active Calls: 206
Permanent Calls: 0
Peak Calls: 233
Terminating Calls: 104
Item Description
Channel Location of EOC, by DS1 and DS0 number.
Link Status Up – indicates LAPD communications link with switch is
established and healthy.
Down – out of service.
None – no link defined.
Mode Active or Standby – One EOC is active and the other is in
standby. If the active EOC fails, the switch will command the
standby EOC to become active.