Carrier Access Access Navigator - Manual (Page 581)

Access Navigator - Release 1.8 August 2003 18-125
CLI Language Reference
CLI Command List
Set Remote V35 CTS
Purpose: Sets the Access Bank II V.35 interface Clear to Send (CTS) timing and signal levels for
flow control. The CTS logic signal can be always high or low, or set to follow the
Carrier Detect (CD) or Ready to Send (RTS) signals.
Security: Level 2 (operator)
Syntax: set remote <n> v35 cts <cd|high|low|rts>
Example: set remote 9 v35 cts rts
Set Remote V35 Data
Purpose: Sets the Access Bank II V.35 interface data polarity to normal or inverted.
Security: Level 2 (operator)
Syntax: set remote <n> v35 data <invert|normal>
Example: set remote 9 v35 data normal
Field Description
n DS1 number, 1 to 32.
cd CTS follows CD.
high CTS always high.
low CTS always low.
rts CTS follows RTS.
Field Description
n DS1 number, 1 to 32.
invert Invert data.
normal No data inversion.