Carrier Access Access Navigator - Manual (Page 361)

Access Navigator - Release 1.8 August 2003 15-19
Diagnostics & Troubleshooting
Status Equipment
Status Equipment
Display the status of all cards installed in the Access Navigator. After giving the command, a message
similar to the following will appear.
Syntax: status equipment
Message:
Equipment Status Version
--------- ------ -------
Controller A Active 01.60 GR-303 Option
Controller B Standby 01.60 GR-303 Option
DS1 Card 1 Installed 1
DS1 Card 2 Installed 1
DS1 Card 3 Installed 1
DS1 Card 4 Installed 1
DS1 Card 5 Installed 1
DS1 Card 6 Installed 1
DS1 Card 7 Card not installed
DS1 Card 8 Card not installed
Description:
Item Description
Equipment Lists card type and card slot.
Controller - Slots A and B only.
DS1 Card - Slots 1 through 8 only.
Status Active - The Controller card is active.
Standby - The Controller card is in standby.
Unknown - Card installed but not responding.
Installed - Card installed.
Card Not Installed – Empty card slot.
Card Failed - transient message indicating standby
Controller failed software update and will reboot.
Version Controller - Firmware version plus options.
DS1 Card - Version of card.