Configuration change log, Configuration change log -6 – Carrier Access Access Navigator User Manual
Page 348
15-6
August 2003
Access Navigator - Release 1.8
Diagnostics & Troubleshooting
Configuration Change Log
Syntax:
log ds1 <n>
Displays only DS1 alarms.
Syntax:
log ds1 <n> <major|minor|alert|info>
Displays only DS1 alarms with a specified severity level.
Syntax:
log equipment
Displays only equipment alarms.
Syntax:
log equipment <major|minor|alert|info>
Displays only equipment alarms with a specified severity level.
Syntax:
log info
Displays only informational events.
Syntax:
clear log
Erases all data in the log file.
Configuration Change Log
The Access Navigator maintains a log of the most recent 500 configuration changes in a separate log
file, which can be displayed using the CLI log config command (see Log Config on
Filtering options allow the user to display selected events. The Access Navigator also records the
Management Interface causing the change – CLI, EOC, SNMP, or ICC (inter-controller commands).
Syntax:
log config
Displays all configuration log events.
Syntax:
log config ds0 <n:ch>
Displays only the configuration management events affecting a DS0 channel or range
of channels.
Syntax:
log config ds1 <n>
Displays only the configuration management events affecting a DS1 or range of DS1s.
Syntax:
log config crv <value>
Displays only the configuration management events affecting a CRV or range of
CRVs.
Syntax:
log config source <cli|eoc|snmp|icc>
Displays only the configuration management events from a management interface.
Syntax:
clear config log
Erases all data in the configuration change log file.