Carrier Access Access Navigator - Manual (Page 610)

18-154 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Show Switch
Purpose: Displays the current switch setting, use the following command.
Security: Level 3 (monitor)
Syntax: show switch
Message: Switch setting: 5ESS
Show Time
Purpose: Display Access Navigator system clock time. Time format is 24-hour clock in
hours:minutes:seconds.
Security: Level 3 (monitor)
Syntax: show time
Message: 08:30:45
Show TMC
Purpose: Shows the current primary and secondary TMC locations.
Security: Level 3 (monitor)
Syntax: show tmc
Message:
TMC Settings:
Primary: DS1 #25 channel 24
Secondary: DS1 #29 channel 24
Switch Setting Description
5ess Lucent 5ESS
dms Nortel DMS
generic Generic switch defined in Telcordia (Bellcore) generic TR-303
specification, Supplement 3 EOC definition)
Item Description
Primary Primary TMC. Default is DS1 #25, DS0 #24.
Secondary Secondary TMC. Default is DS1 #29, DS0 #24.