Carrier Access Access Navigator - Manual (Page 355)

Access Navigator - Release 1.8 August 2003 15-13
Diagnostics & Troubleshooting
Status DS1
Status DS1
Displays a detailed DS1 service status message. (For a short status summary, use the status ds1 all
command.)
Syntax: status ds1 <n>
Example: status ds1 12
Example: status ds1 1-4
Message:
Status for DS1 1:
Receive: Traffic
Transmit: Traffic
Loop: None
State: In use as DROP
FDL Type: None
Remote Device Mgmt Type: CA FDL
Remote Device Mgmt Status: In Service
Status for DS1 2:
Receive: Traffic
Transmit: Traffic
Loop: None
State: In use as DROP
FDL Type: T1403
Remote Device Mgmt Type: None
Status for DS1 3:
Receive: Traffic
Transmit: Traffic
Loop: None
State: In use as DROP
FDL Type: None
Remote Device Mgmt Type: None
Status for DS1 4:
Receive: Loss of Signal
Transmit: RAI/Yellow Alarm
Loop: None
State: User set Out of Service
FDL Type: None
Remote Device Mgmt Type: None
Field Description
n DS1 number, 1 to 32, or a range of numbers such as 2-8.