Carrier Access Access Navigator User Manual
Page 525
Access Navigator - Release 1.8
August 2003
18-69
CLI Language Reference
CLI Command List
Message:
Waiting for pattern sync........ok.
Testing line...
08:15:47 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:48 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:49 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:50 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:51 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:52 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:53 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:54 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:55 FBE:0 BE:0 CRC:0 BPV/LCV:0
08:15:56 FBE:0 BE:0 CRC:0 BPV/LCV:0
Totals Error Rates
FBE: 0 0.000000e+00
BE: 0 0.000000e+00
CRC: 0 0.000000e+00
LCV/BPV: 0 0.000000e+00
Signaling done.
The following error message will occur if an incorrect pattern is received:
Message:
Waiting for pattern sync.........no sync.
The following error message will occur if there is no loopback in effect:
Message:
*-Unable to send code;
*- far-end is not in loopback.
Description:
Item
Description
Time
Time is recorded in one-second intervals. Format is 24-hour
clock in hours:minutes:seconds with colons to separate the digits,
as in 08:30:45 and 15:22:10.
FBE
Number of Frame Bit Errors (4095 maximum) in one-second
interval.
BE
Number of Bit Errors (4095 maximum) in one-second interval
CRC
Number of Cyclical Redundancy Check errors (1023 maximum)
in one-second interval
BPV/LCV
Number of Bi-Polar Violations and Line Code Violations
(16,383 maximum) in one-second interval
Totals
Total number of errors for 10-second test interval