Carrier Access Access Navigator - Manual (Page 579)

Access Navigator - Release 1.8 August 2003 18-123
CLI Language Reference
CLI Command List
Set Remote T1Drop LBO
Purpose: This command sets the T1 Drop line buildout (lbo) to the required DSX-1 equalization
or CSU attenuation.
Security: Level 2 (operator)
Syntax: set remote <n> t1drop lbo <setting>
Example: set remote 9 t1drop lbo 3
Set Remote T1Drop Linecode
Purpose: Sets the T1 Drop line coding to AMI (alternate mark inversion) or B8ZS (binary 8 zero
substitution).
Security: Level 2 (operator)
Syntax: set remote <n> t1drop linecode <ami|b8zs>
Example: set remote 9 t1drop linecode b8zs
Field Description
n DS1 number, 1 to 32.
setting The line buildout setting is a number, from 1 to 9.
1 – Set DSX-1 equalization for 0-133 ft.
2 – Set DSX-1 equalization for 133-266 ft.
3 – Set DSX-1 equalization for 266-399 ft.
4 – Set DSX-1 equalization for 399-533 ft.
5 – Set DSX-1 equalization for 533-666 ft.
6 – Set CSU attenuation for LBO of 0dB.
7 – Set CSU attenuation for LBO of -7.5dB.
8 – Set CSU attenuation for LBO of -15dB.
9 – Set CSU attenuation for LBO of -22.5dB.
Field Description
n DS1 number, 1 to 32.
ami Set AMI line coding.
b8zs Set B8ZS line coding.