Clear bert log, Clear blocked call count, Clear config log – Carrier Access Access Navigator User Manual
Page 483: Clear ds1 performance, Clear bert log -27, Clear blocked call count -27, Clear config log -27, Clear ds1 performance -27
Access Navigator - Release 1.8
August 2003
18-27
CLI Language Reference
CLI Command List
Clear BERT Log
Purpose:
Erases all data in the BERT log file, which records error counts.
Security:
Level 3 (monitor)
Syntax:
clear bert log
Clear Blocked Call Count
Purpose:
Sets the blocked call count to zero (see Status TMC on
Security:
Level 3 (monitor)
Syntax:
clear blocked call count
Clear Config Log
Purpose:
Erases all data in the configuration change log file, which records changes to the system
configuration for each management interface.
Security:
Level 3 (monitor)
Syntax:
clear config log
Clear DS1 Performance
Purpose:
Clears only the performance data for the specified Access Navigator DS1, setting all
error counters back to zero. This command does not reset the interval timer, so that new
errors will only be accumulated for the remainder of the “current” 15 minute interval.
This may affect the totals shown for the “previous” 15 minute, 1 hour, and 1 day
intervals. The interval timer is only reset by a power-on reset or reset all command.
Security:
Level 3 (monitor)
Syntax:
clear ds1
Example:
clear ds1 9 performance
Severity
Severity of the event (major, minor, alert).
Description
Message describing the event.
Field
Description
n
DS1 number, 1 to 32
Item
Description