Carrier Access Access Navigator - Manual (Page 433)

Access Navigator - Release 1.8 August 2003 16-35
Maintenance Procedures
Install SIMM on Controller Card
switch controller
13. Verify active status of upgraded Controller. The LED indicators should be as follows:
Requirement: Upgraded CONTROLLER ACTIVE/STANDBY indicator lights green.
14. Verify operational status of upgraded Controller by entering the following command:
status equipment
Requirement: Upgraded Controller status is “Active”.
15. To install SIMM on other Controller card, repeat procedure starting at Step 1.
16. End management session by entering following command:
exit
Replace Front Cover
DANGER! F IRE H AZARD . S TANDARDS UL 1950 AND C22.2 N O . 950.95 REQUIRE
THAT ALL ACCESS COVERS BE REPLACED TO PREVENT FIRES FROM SPREADING TO
NEARBY EQUIPMENT .
Replace front cover and tighten screws.