H3C Technologies H3C S3600 Series Switches - Manual (Page 997)

1-2
Local Boot ROM and Software Loading
If your terminal is directly connected to the Console port of the switch, you can load the Boot ROM and
host software locally.
Before loading the software, make sure that your terminal is correctly connected to the switch.
The loading process of the Boot ROM software is the same as that of the host software, except that
during the former process, you should press “6” or and after entering the BOOT
menu and the system gives different prompts. The following text mainly describes the Boot ROM
loading process.
BOOT Menu
Starting......
***********************************************************
* *
* H3C S3600-52P-EI BOOTROM, Version 510 *
* *
***********************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date : May 29 2007, 19:39:48
CPU Clock Speed : 200MHz
BUS Clock Speed : 33MHz
Memory Size : 64MB
Mac Address : 000fe2123456
Press Ctrl-B to enter Boot Menu...
Press . The system displays:
Password :
To enter the BOOT menu, you should press within five seconds (full startup mode) or one
second (fast startup mode) after the information “Press Ctrl-B to enter BOOT Menu...” displays.
Otherwise, the system starts to extract the program; and if you want to enter the BOOT Menu at this
time, you will have to restart the switch.