H3C Technologies H3C S3600 Series Switches - Manual (Page 1061)

1-10
To do… Use the command… Remarks
Configure the TTL ttl number
Optional
By default, TTL is 20.
The sendpacket passroute command
voids the ttl command.
Configure the
automatic test interval
frequency interval
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three
seconds.
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Configure the type of
FTP operation
ftp-operation { get | put }
Optional
By default, the type of FTP operation is
get, that is, the FTP operation will get a
file from the FTP server.
Configure an FTP login
username
username name
Configure an FTP login
password
password password
Required
By default, neither username nor
password is configured.
Configure a file name
for the FTP operation
filename file-name
Required
By default, no file name is configured for
the FTP operation
Configure size of a file
to be uploaded in an
FTP test
filesize file-size
Required
By default, the file is 1 MB.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in any
view.
4) Configuring HTTP test on HWPing client
Follow these steps to configure HTTP test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group
and enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type test-type http
Required
By default, the test type is ICMP.