H3C Technologies H3C S3600 Series Switches - Manual (Page 48)

2-6
To do… Use the command… Remarks
Enter system view system-view —
Enter AUX user interface view user-interface aux 0 —
Configure not to authenticate
users
authentication-mode none
Required
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
Set the baud
rate
speed speed-value
Optional
The default baud rate of a console
port is 9,600 bps.
Set the check
mode
parity { even | none | odd }
Optional
By default, the check mode of a
console port is none, that is, no
check is performed.
Set the stop bits stopbits { 1 | 1.5 | 2 }
Optional
The stop bits of a console port is
1.
Configure
the console
port
Set the data bits databits { 7 | 8 }
Optional
The default data bits of a console
port is 8.
Configure the command level
available to users logging in to
the user interface
user privilege level level
Optional
By default, commands of level 3
are available to users logging in to
the AUX user interface, and
commands of level 0 are available
to users logging in to the VTY user
interface.
Enable terminal services shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of
lines the screen can contain
screen-length screen-length
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Set the history command
buffer size history-command max-size
value
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.