H3C Technologies H3C S3600 Series Switches - Manual (Page 1063)

1-12
To do… Use the command… Remarks
Configure the TTL ttl number
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl command.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will be
made.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service tos value
Optional
By default, the service type is
zero.
Configure the type of HTTP
operation
http-operation { get | post }
Optional
By default, the type of HTTP
operation is get, that is, the HTTP
operation will get data from the
HTTP server.
Configure the HTTP operation
string and HTTP version
http-string string version
Optional
By default, no HTTP operation
string and HTTP version are
configured.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
You can execute the command in
any view.
5) Configuring jitter test on HWPing client
Follow these steps to configure jitter test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group
and enter its view hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the test type
test-type jitter [ codec
codec-value ]
Required
By default, the test type is
ICMP.