H3C Technologies H3C S3600 Series Switches - Manual (Page 53)

2-11
Console Port Login Configuration with Authentication Mode Being
Scheme
Configuration Procedure
Follow these steps to configure console port login with the authentication mode being scheme:
To do… Use the command… Remarks
Enter system view system-view —
Enter the
default ISP
domain view
domain domain-name
Specify the AAA
scheme to be
applied to the
domain
scheme { local | none |
radius-scheme
radius-scheme-name [ local ]
| hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
Configure
the
authenticati
on mode
Quit to system
view
quit
Optional
By default, the local AAA scheme
is applied.
If you specify to apply the local
AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
Perform AAA&RADIUS
configuration on the switch.
(Refer to the AAA part for more.)
Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual
of AAA server.)
Create a local user (Enter local
user view.)
local-user user-name
Required
No local user exists by default.
Set the authentication
password for the local user password { simple | cipher }
password
Required
Specify the service type for
AUX users service-type terminal [ level
level ]
Required
Quit to system view quit —
Enter AUX user interface view user-interface aux 0 —
Configure to authenticate
users locally or remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.