H3C Technologies H3C S3600 Series Switches - Manual (Page 429)

4-24
[SwitchA-Vlan-interface100] quit
[SwitchA] interface vlan-interface 101
[SwitchA-Vlan-interface101] pim sm
[SwitchA-Vlan-interface101] quit
[SwitchA] interface vlan-interface 102
[SwitchA-Vlan-interface102] pim sm
[SwitchA-Vlan-interface102] quit
The configuration on Switch B and Switch C is similar to that on Switch A. The configuration on Switch D
and Switch E is also similar to that on Switch A except that it is not necessary to enable IGMP on the
corresponding interfaces on these two switches.
3) Configure a C-BSR and a C-RP
# Configure the service scope of RP advertisements and the positions of the C-BSR and C-RP on
Switch E.
system-view
[SwitchE] acl number 2005
[SwitchE-acl-basic-2005] rule permit source 225.1.1.0 0.0.0.255
[SwitchE-acl-basic-2005] quit
[SwitchE] pim
[SwitchE-pim] c-bsr vlan-interface 102 24
[SwitchE-pim] c-rp vlan-interface 102 group-policy 2005
[SwitchE-pim] quit
Verifying the configuration
# Display PIM neighboring relationships on Switch E.
display pim neighbor
Neighbor's Address Interface Name Uptime Expires
192.168.9.1 Vlan-interface102 02:47:04 00:01:42
192.168.2.1 Vlan-interface103 02:45:04 00:04:46
192.168.3.1 Vlan-interface104 02:42:24 00:04:45
192.168.4.2 Vlan-interface105 02:43:44 00:05:44
# Display BSR information on Switch E.
display pim bsr-info
Current BSR Address: 192.168.9.2
Priority: 0
Mask Length: 24
Expires: 00:01:39
Local host is BSR
# Display RP information on Switch E.
display pim rp-info
PIM-SM RP-SET information:
BSR is: 192.168.9.2
Group/MaskLen: 225.1.1.0/24
RP 192.168.9.2
Version: 2
Priority: 0