H3C Technologies H3C S3600 Series Switches - Manual (Page 49)

2-7
To do… Use the command… Remarks
Set the timeout time for the
user interface idle-timeout minutes
[ seconds ]
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no
operation is performed in the user
interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.
Configuration Example
Network requirements
Assume that the switch is configured to allow users to log in through Telnet, and the current user level is
set to the administrator level (level 3). Perform the following configurations for users logging in through
the console port (AUX user interface).
z Do not authenticate the users.
z Commands of level 2 are available to the users logging in to the AUX user interface.
z The baud rate of the console port is 19,200 bps.
z The screen can contain up to 30 lines.
z The history command buffer can contain up to 20 commands.
z The timeout time of the AUX user interface is 6 minutes.
Network diagram
Figure 2-6 Network diagram for AUX user interface configuration (with the authentication mode being
none)
Configuration procedure
# Enter system view.
system-view
# Enter AUX user interface view.
[Sysname] user-interface aux 0