Network diagram, Configuration procedure – H3C Technologies H3C S3600 Series Switches User Manual
Page 591
1-17
z
The actual IP addresses of the master and the backups are 10.100.10.2 and 10.100.10.3
respectively.
z
The master is connected to the upstream network through its Ethernet 1/0/1 port. The backup is
connected to the upstream network through its Ethernet 1/0/2 port.
z
The virtual router IP address of the VRRP group is 10.100.10.1.
z
Enable the port tracking function on Ethernet 1/0/1 port of the master and specify that the priority of
the master decreases by 50 when Ethernet 1/0/1 port fails, which triggers new master being
determined in the VRRP group 1.
Network diagram
Figure 1-6 Network diagram for VRRP port tracking configuration
Vlan-int3
10.100.10. 2/24
Master
Network
Layer 2 Switch
Backup
Actual IP address
Virtual IP address
202.38.160.111/24
Virtual IP address
202.38.160.111/24
Vlan-int2
202.38.160. 1/24
Actual IP address
Vlan-int2
202.38.160.2/24
Configuration procedure
z
Configure the master switch.
# Enter system view.
# Create VLAN 3.
[Sysname] vlan 3
[Sysname-vlan3] port Ethernet1/0/1
[Sysname-vlan3] quit
# Configure VLAN-interface 3.
[Sysname] interface Vlan-interface 3
[Sysname-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[Sysname-Vlan-interface3] quit
# Create VLAN 2.
[Sysname] vlan 2
[Sysname-vlan2] port Ethernet1/0/2
[Sysname-vlan2] quit
# Configure VLAN-interface 2.