H3C Technologies H3C S3600 Series Switches - Manual (Page 1016)

4-1
4
Device Management
When configuring device management, go to these sections for information you are interested in:
z Introduction to Device Management
z Device Management Configuration
z Displaying the Device Management Configuration
z Remote Switch APP Upgrade Configuration Example
Introduction to Device Management
Device Management includes the following:
z Reboot the Ethernet switch
z Configure real-time monitoring of the running status of the system
z Specify the APP to be used at the next reboot
z Update the Boot ROM
z Update the host software of the switches in the Fabric
z Load Hot Patch
z Identifying and Diagnosing Pluggable Transceivers
Device Management Configuration
Device Management Configuration Task list
Complete the following tasks to configure device management:
Task Remarks
Rebooting the Ethernet Switch Optional
Scheduling a Reboot on the Switch Optional
Configuring Real-time Monitoring of the Running Status of the System Optional
Specifying the APP to be Used at Reboot Optional
Upgrading the Boot ROM Optional
Upgrading the Host Software in the Fabric Optional
Loading Hot Patch Optional
Identifying and Diagnosing Pluggable Transceivers Optional
Rebooting the Ethernet Switch
You can perform the following operation in user view when the switch is faulty or needs to be rebooted.