H3C Technologies H3C S3600 Series Switches - Manual (Page 961)

1-14
[ftp]
# Enter the authorized directory on the FTP server.
[ftp] cd switch
# Execute the put command to upload the configuration file named config.cfg to the FTP server.
[ftp] put config.cfg
# Execute the get command to download the file named switch.bin to the Flash memory of the switch.
[ftp] get switch.bin
# Execute the quit command to terminate the FTP connection and return to user view.
[ftp] quit
# After downloading the file, use the boot boot-loader command to specify the downloaded file
(switch.bin) to be the application for next startup, and then restart the switch. Thus the switch
application is upgraded.
boot boot-loader switch.bin
reboot
For information about the boot boot-loader command and how to specify the startup file for a switch,
refer to the System Maintenance and Debugging module of this manual.
SFTP Configuration
Complete the following tasks to configure SFTP:
Task Remarks
Enabling an SFTP server Required
Configuring connection idle
time
Optional SFTP Configuration: A Switch
Operating as an SFTP Server
Supported SFTP client
software
—
Basic configurations on an
SFTP client
—
SFTP Configuration: A Switch
Operating as an SFTP Client
Specifying the source interface
or source IP address for an
SFTP client
Optional