H3C Technologies H3C S3600 Series Switches - Manual (Page 943)

1-6
15367 KB total (4631 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
dir unit1>flash:/test/
Directory of unit1>flash:/test/
1 -rw- 1376 Apr 04 2000 04:50:30 1.cfg
15367 KB total (2025 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
File Attribute Configuration
Introduction to File Attributes
The following three startup files support file attribute configuration:
z App files: An app file is an executable file, with .bin as the extension.
z Configuration files: A configuration file is used to store and restore configuration, with .cfg as the
extension.
z Web files: A Web file is used for Web-based network management, with .web as the extension.
The app files, configuration files, and Web files support three kinds of attributes: main, backup and none,
as described in Table 1-1 .
Table 1-1 Descriptions on file attributes
Attribute name Description Feature Identifier
main
Identifies main startup
files. The main startup
file is preferred for a
switch to start up.
In the Flash memory, there
can be only one app file, one
configuration file and one
Web file with the main
attribute.
(*)
backup
Identifies backup
startup files. The
backup startup file is
used after a switch
fails to start up using
the main startup file.
In the Flash memory, there
can be only one app file, one
configuration file and one
Web file with the backup
attribute.
(b)
none
Identifies files that are
neither of main
attribute nor backup
attribute.
— None