H3C Technologies H3C S3600 Series Switches - Manual (Page 28)

1-12
View
Available
operation
Prompt example Enter method Quit method
OSPF area view
Configure OSPF
area parameters
Supported by
only S3600-EI
series switches
[Sysname-ospf-1
-area-0.0.0.1]
Execute the area
command in
OSPF view.
Execute the quit
command to
return to OSPF
view.
Execute the
return command
to return to user
view.
Routing policy
view Configure routing
policy [Sysname-route-
policy]
Execute the
route-policy
command in
system view.
Basic ACL view
Define rules for a
basic ACL (with
ID ranging from
2000 to 2999)
[Sysname-acl-
basic-2000]
Execute the acl
number
command in
system view.
Advanced ACL
view
Define rules for
an advanced ACL
(with ID ranging
from 3000 to
3999)
[Sysname-acl-ad
v-3000]
Execute the acl
number
command in
system view.
Layer 2 ACL view
Define rules for
an layer 2 ACL
(with ID ranging
from 4000 to
4999)
[Sysname-acl-eth
ernetframe-4000]
Execute the acl
number
command in
system view.
User-defined
ACL view
Define rules for a
user-defined ACL
(with ID ranging
from 5000 to
5999)
[Sysname-acl-us
er-5000]
Execute the acl
number
command in
system view.
IPv6 ACL view
Define rules for a
IPv6 ACL (with ID
ranging from
5000 to 5999)
[Sysname-acl-us
er-5000]
Execute the acl
number
command in
system view.
QoS profile view
Define QoS
profile [Sysname-qos-pr
ofile-a123]
Execute the
qos-profile
command in
system view.
RADIUS scheme
view
Configure
RADIUS scheme
parameters
[Sysname-radius-
1]
Execute the
radius scheme
command in
system view.
ISP domain view
Configure ISP
domain
parameters
[Sysname-isp-aa
a123.net]
Execute the
domain
command in
system view.
HWPing test
group view
Configure
HWPing test
group parameters
[Sysname-hwpin
g-a123-a123]
Execute the
hwping
command in
system view.
Execute the quit
command to
return to system
view.
Execute the
return command
to return to user
view.