H3C Technologies H3C S3600 Series Switches - Manual (Page 1114)

2-4
When you use the telnet ipv6 command to connect to the Telnet server, you must specify the “–i”
keyword if the destination address is a link-local address.
Displaying and maintaining IPv6 Telnet
To do… Use the command… Remarks
Display the use information of
the users who have logged in
display users [ all ] Available in any view
IPv6 Application Configuration Example
IPv6 Applications
Network requirements
In Figure 2-3 , SWA, SWB, and SWC are three switches, among which SWA is an H3C S3600 Ethernet
switch, SWB and SWC are two switches supporting IPv6 forwarding. In a LAN, there is a Telnet server
and a TFTP server for providing Telnet service and TFTP service to the switch respectively. It is required
that you telnet to the telnet server from SWA and download files from the TFTP server.
Network diagram
Figure 2-3 Network diagram for IPv6 applications
SWA
SWB
SWC
3003::2/64
3003::1/64
3002::2/64
3002::1/64
3001::2/64
3001::4/64
3001::3/64
Telnet_Server TFTP_Server