beautypg.com

Dhcp server configuration example, Network requirements, Network diagram – H3C Technologies H3C S3600 Series Switches User Manual

Page 667

background image

2-28

DHCP Server Configuration Example

Network requirements

z

The DHCP server (Switch A) assigns IP address to clients in subnet 10.1.1.0/24, which is

subnetted into 10.1.1.0/25 and 10.1.1.128/25.

z

The IP addresses of VLAN-interface 1 and VLAN-interface 2 on Switch A are 10.1.1.1/25 and

10.1.1.129/25 respectively.

z

In the address pool 10.1.1.0/25, the address lease duration is ten days and twelve hours, domain

name suffix aabbcc.com, DNS server address 10.1.1.2, gateway 10.1.1.126, and WINS server

10.1.1.4.

z

In the address pool 10.1.1.128/25, the address lease duration is five days, domain name suffix

aabbcc.com, DNS server address 10.1.1.2, and gateway address 10.1.1.254, and there is no

WINS server address.

If you use the inheriting relation of parent and child address pools, make sure that the number of the

assigned IP addresses does not exceed the number of the IP addresses in the child address pool;

otherwise extra IP addresses will be obtained from the parent address pool, and the attributes (for

example, gateway) also are based on the configuration of the parent address pool.

For example, in the network to which VLAN-interface 1 is connected, if multiple clients apply for IP

addresses, the child address pool 10.1.1.0/25 assigns IP addresses first. When the IP addresses in the

child address pool have been assigned, if other clients need IP addresses, the IP addresses will be

assigned from the parent address pool 10.1.1.0/24 and the attributes will be based on the configuration

of the parent address pool.

For this example, the number of clients applying for IP addresses from VLAN-interface 1 is

recommended to be less than or equal to 122 and the number of clients applying for IP addresses from

VLAN-interface 2 is recommended to be less than or equal to 124.

Network diagram

Figure 2-1 Network diagram for DHCP configuration

This manual is related to the following products: