H3C Technologies H3C S3600 Series Switches - Manual (Page 75)

5-1
5
Logging In Through the Web-based Network
Management System
Go to these sections for information you are interested in:
z Introduction
z Establishing an HTTP Connection
z Configuring the Login Banner
z Enabling/Disabling the WEB Server
Introduction
An S3600 Ethernet switch has a Web server built in. It enables you to log in to an S3600 Ethernet switch
through a Web browser and then manage and maintain the switch intuitively by interacting with the
built-in Web server.
To log in to an S3600 Ethernet switch through the built-in Web-based network management system,
you need to perform the related configuration on both the switch and the PC operating as the network
management terminal.
Table 5-1 Requirements for logging in to a switch through the Web-based network management
system
Item Requirement
The VLAN interface of the switch is assigned an IP address, and the route
between the switch and the Web network management terminal is reachable.
(Refer to the IP Address Configuration – IP Performance Configuration and
Routing Protocol parts for related information.)
Switch
The user name and password for logging in to the Web-based network
management system are configured.
IE is available. PC operating as
the network
management
terminal
The IP address of the VLAN interface of the switch, the user name, and the
password are available.
Establishing an HTTP Connection
1) Assign an IP address to VLAN-interface 1 of the switch (VLAN 1 is the default VLAN of the switch).
See Telnetting to a Switch from a Terminal for related information.
2) Configure the user name and the password on the switch for the Web network management user to
log in.
# Create a Web user account, setting both the user name and the password to admin and the user level
to 3.
system-view
[Sysname] local-user admin