H3C Technologies H3C S3600 Series Switches - Manual (Page 66)

3-10
Scenario
Authentication
mode
User type Command
Command
level
The user privilege level level
command is not executed, and the
service-type command does not specify
the available command level.
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Level 0
The user privilege level level
command is executed, and the
service-type command does not specify
the available command level.
VTY users that
are authenticated
in the RSA mode
of SSH
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the user
privilege level
level command
The user privilege level level
command is not executed, and the
service-type command does not specify
the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Determined by
the service-type
command
The user privilege level level
command is executed, and the
service-type command does not specify
the available command level.
Level 0
VTY users that
are authenticated
in the password
mode of SSH
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the service-type
command
Refer to AAA Operation and SSH Operation of this manual for information about AAA, RADIUS, and
SSH.
Configuration Example
Network requirements
Assume current user logins through the console port and the user level is set to the administrator level
(level 3). Perform the following configurations for users logging in to VTY 0 using Telnet.
z Configure the local user name as guest.
z Set the authentication password of the local user to 123456 (in plain text).