H3C Technologies H3C S3600 Series Switches - Manual (Page 346)

4-19
Configuring the Maximum Number of OSPF ECMP Routes
Follow these steps to configure the maximum number of OSPF ECMP routes:
To do... Use the command... Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id [ router-id
router-id ] ]
—
Configure the maximum
number of OSPF ECMP routes
multi-path-number value
Optional
3 by default
Configuring OSPF to Redistribute External Routes
Follow these steps to configure OSPF to redistribute external routes:
To do... Use the command... Remarks
Enter system view system-view —
Enter OSPF view
ospf [ process-id [ router-id
router-id ] ]
—
Configure OSPF to
redistribute routes from
another protocol import-route protocol [ process-id ]
[ cost value | type value | tag value |
route-policy route-policy-name ] *
Required
By default, OSPF does not
import the routing information
of other protocols.
Configure OSPF to filter
outgoing routes filter-policy { acl-number | ip-prefix
ip-prefix-name } export [ protocol ]
Optional
By default, OSPF does not filter
advertised routes.
Enable OSPF to import
the default route
default-route-advertise [ always |
cost value | type type-value |
route-policy route-policy-name ]* Optional
By default, OSPF does not
import the default route.
Configure the default
parameters for
redistributed routes,
including cost, interval,
limit, tag, and type
default { cost value | interval
seconds | limit routes | tag tag | type
type } *
Optional
These parameters respectively
default to:
z Cost: 1
z Interval: 1 (second)
z Limit: 1000
z Tag: 1
z Type: 2