Figure 1-12 – H3C Technologies H3C S3600 Series Switches User Manual

Page 1010

1-15

Figure 1-12 Log on to the FTP server

Step 7: Use the put command to upload the file switch.btm to the switch, as shown in

Figure 1-13 Upload file switch.btm to the switch

Step 8: Configure switch.btm to be the Boot ROM at next startup, and then restart the switch.

boot bootrom switch.btm

This will update Bootrom on unit 1. Continue? [Y/N] y

Upgrading Bootrom, please wait...

Upgrade Bootrom succeeded!

reboot

After the switch restarts, the file switch.btm is used as the Boot ROM. It indicates that the Boot ROM

loading is finished.

This manual is related to the following products: