H3C Technologies H3C S3600 Series Switches - Manual (Page 82)

8-1
8
User Control
Go to these sections for information you are interested in:
z Introduction
z Controlling Telnet Users
z Controlling Network Management Users by Source IP Addresses
z Controlling Web Users by Source IP Address
Refer to the ACL part for information about ACL.
Introduction
You can control users logging in through Telnet, SNMP and WEB by defining Access Control List (ACL),
as listed in Table 8-1 .
Table 8-1 Ways to control different types of login users
Login mode Control method Implementation Related section
By source IP address Through basic ACL
Controlling Telnet Users by
Source IP Addresses
By source and
destination IP address Through advanced
ACL
Controlling Telnet Users by
Source and Destination IP
Addresses
Telnet
By source MAC
address
Through Layer 2 ACL
Controlling Telnet Users by
Source MAC Addresses
SNMP
By source IP
addresses
Through basic ACL
Controlling Network
Management Users by
Source IP Addresses
By source IP
addresses
Through basic ACL
Controlling Web Users by
Source IP Address
WEB
Disconnect Web
users by force By executing
commands in CLI Disconnecting a Web User
by Force