H3C Technologies H3C S3600 Series Switches - Manual (Page 1064)

1-13
To do… Use the command… Remarks
Configure the destination IP
address
destination-ip ip-address
Required
The destination address must
be the IP address of a UDP
listening service on the
HWPing server.
By default, no destination
address is configured.
Configure the destination port
destination-port
Port-number
Required
The destination port must be
the port of a UDP listening
service on the HWPing server.
By default, no destination port
is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Configure the packet size datasize size
Optional
By default, the packet size is 68
bytes.
Configure a stuffing character
string
datafill string
Optional
By default, the numbers
between 0 and 255 are stuffed
into datagrams in a cyclically
way.
Configure a test description description string
Optional
By default, no description
information is configured.
Enable history record history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record
history keep-time keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and
the maximum number of
retained statistics information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.