H3C Technologies H3C S3600 Series Switches - Manual (Page 113)

2-3
The operation of enabling/disabling a VLAN’s VLAN interface does not influence the physical status of
the Ethernet ports belonging to this VLAN.
Displaying VLAN Configuration
To do... Use the command... Remarks
Display the VLAN interface
information display interface Vlan-interface
[ vlan-id ]
Display the VLAN information
display vlan [ vlan-id [ to vlan-id ] | all |
dynamic | static ]
Available in any
view.
Configuring a Port-Based VLAN
Port-Based VLAN Configuration Task List
Complete these tasks to configure a port-based VLAN:
Task Remarks
Configuring the Link Type of an Ethernet Port Optional
Assigning an Ethernet Port to a VLAN Required
Configuring the Default VLAN for a Port Optional
Configuring the Link Type of an Ethernet Port
Follow these steps to configure the link type of an Ethernet port:
To do… Use the command… Remarks
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Configure the port link type
port link-type { access |
hybrid | trunk }
Required
The link type of an Ethernet port is
access by default.