H3C Technologies H3C S3600 Series Switches - Manual (Page 1060)

1-9
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing
client function
hwping-agent enable
Required
By default, the HWPing client function is
disabled.
Create an HWPing test
group and enter its view hwping administrator-name
operation-tag Required
By default, no test group is configured.
Configure the test type test-type ftp
Required
By default, the test type is ICMP.
Configure the
destination IP address
destination-ip ip-address
Required
By default, no destination address is
configured.
Configure the source IP
address
source-ip ip-address
Required
By default, no source IP address is
configured.
Configure the source
port
source-port port-number
Optional
By default, no source port is configured.
Configure the number
of probes per test
count times
Optional
By default, each test makes one probe.
Configure a test
description
description string
Optional
By default, no description information is
configured.
Configure the
maximum number of
history records that can
be saved
history-records number
Optional
By default, the maximum number is 50.
Enable history record history-record enable
Optional
By default, history record is not enabled.
Configure the retaining
time of history record
history keep-time keep-time
Optional
By default, the retaining time of history
record is 120 minutes.
Configure statistics
interval and the
maximum number of
retained statistics
information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Configure the retaining
time of statistics
information
statistics keep-time
keep-time
Optional
By default, the retaining time of statistics
information is 120 minutes.
Configure test start
time and lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime Optional
By default, no test start time and lifetime
is configured.
Enable routing table
bypass
sendpacket passroute
Optional
By default, routing table bypass is
disabled.