H3C Technologies H3C S3600 Series Switches - Manual (Page 1072)

1-21
To do… Use the command… Remarks
Configure test start time and
lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime Optional
By default, no test start time
and lifetime is configured.
Enable routing table bypass sendpacket passroute
Optional
By default, routing table bypass
is disabled.
Configure the TTL ttl number
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl
command.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service tos value
Optional
By default, the service type is
zero.
Configure the domain name to
be resolved dns resolve-targetdomai
domainname
Required
By default, the domain name to
be resolved by DNS is not
specified.
Configure the IP address of the
DNS server
dns-server ip-address
Required
By default, no DNS server
address is configured.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
The display command can be
executed in any view.
10) Clear all agents on the HWPing client
Follow these steps to clear all agents on the HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Clear all agents on the
HWPing client
hwping-agent clear Required