H3C Technologies H3C S3600 Series Switches - Manual (Page 766)

2-4
Follow these steps to apply a QoS profile manually:
To do… Use the command… Remarks
Enter system view system-view —
In system view
apply qos-profile
profile-name interface
interface-list
Enter Ethernet
port view interface interface-type
interface-number
Apply a QoS
profile to
specific ports
In Ethernet
port view
Apply a QoS
profile to the
current port
apply qos-profile
profile-name
Select either
of the
operations.
By default, a
port has no
QoS profile
applied to it.
Displaying and Maintaining QoS Profile Configuration
To do… Use the command… Remarks
Display QoS profile
configuration
display qos-profile { all | name
profile-name | interface interface-type
interface-number | user user-name }
Available in any view
Configuration Example
QoS Profile Configuration Example
Network requirements
All departments of a company are interconnected through a switch. The 802.1x protocol is used to
authenticate users and control their access to network resources. A user name is someone, and the
authentication password is hello. It is connected to Ethernet 1/0/1 of the switch and belongs to the
test.net domain.
It is required to configure a QoS profile to limit the rate of all the outbound IP packets of the user to 128
kbps and configuring to drop the packets exceeding the target packet rate.