H3C Technologies H3C S3600 Series Switches - Manual (Page 183)

1-9
To do… Use the command… Remarks
Configure the port priority
lacp port-priority
port-priority
Optional
By default, the port priority is
32,768.
Changing the system priority may affect the priority relationship between the aggregation peers, and
thus affect the selected/unselected status of member ports in the dynamic aggregation group.
Configuring a Description for an Aggregation Group
To do… Use the command… Remarks
Enter system view system-view —
Configure a description for an
aggregation group link-aggregation group agg-id
description agg-name
Optional
By default, no description is
configured for an aggregation
group.
If you have saved the current configuration with the save command, after system reboot, the
configuration concerning manual and static aggregation groups and their descriptions still exists, but
that of dynamic aggregation groups and their descriptions gets lost.
Displaying and Maintaining Link Aggregation Configuration
To do… Use the command… Remarks
Display summary information of
all aggregation groups
display link-aggregation summary
Display detailed information of
a specific aggregation group or
all aggregation groups
display link-aggregation verbose
[ agg-id ]
Display link aggregation details
of a specified port or port range
display link-aggregation interface
interface-type interface-number [ to
interface-type interface-number ]
Display local device ID display lacp system-id
Available in any
view
Clear LACP statistics about a
specified port or port range
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
Available in user
view