H3C Technologies H3C S3600 Series Switches - Manual (Page 1070)

1-19
To do… Use the command… Remarks
Configure the number
of probes per test
count times
Optional
By default, one probe is made per test.
Configure the
maximum number of
history records that
can be saved
history-records
number Optional
By default, the maximum number is 50.
Configure the data
packet size
datasize size
Optional
By default, the data packet size is 100 bytes.
Configure a stuffing
character string
datafill string
Optional
By default, the numbers between 0 and 255 are
stuffed into datagrams in a cyclically way.
Configure a test
description
description string
Optional
By default, no description information is
configured.
Enable history record history-record enable
Optional
By default, history record is not enabled.
Configure the
retaining time of
history record
history keep-time
keep-time
Optional
By default, the retaining time of history record is
120 minutes.
Configure statistics
interval and the
maximum number of
retained statistics
information
statistics { interval
interval | max-group
number }
Optional
By default, statistics interval is 120 minutes and
up to two pieces of statistics information can be
retained.
Configure the
retaining time of
statistics information
statistics keep-time
keep-time
Optional
By default, the retaining time of statistics
information is 120 minutes.
Configure test start
time and lifetime
test-time begin
{ hh:mm :ss
[ yyyy/mm/dd ] | now }
lifetime lifetime
Optional
By default, no test start time and lifetime is
configured.
Enable routing table
bypass
sendpacket passroute
Optional
By default, routing table bypass is disabled.
Configure the TTL ttl number
Optional
By default, TTL is 20.
The sendpacket passroute command voids the
ttl command.
Configure the
automatic test interval
frequency interval
Optional
By default, the automatic test interval is zero
seconds, indicating no automatic test will be
made.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three seconds.
Configure the service
type
tos value
Optional
By default, the service type is zero.
Start the test test-enable Required