beautypg.com

Lldpdus, Tlvs – H3C Technologies H3C S3600 Series Switches User Manual

Page 1150

background image

1-3

The fields in the frame are described in

Table 1-2

:

Table 1-2 Description of the fields in a SNAP-encapsulated LLDP frame

Field

Description

Destination MAC address

The MAC address to which the LLDPDU is advertised. It is fixed to
0x0180-C200-000E, a multicast MAC address.

Source MAC address

The MAC address of the sending port. If the port does not have a MAC
address, the MAC address of the sending bridge is used.

Type

The SNAP type for the upper layer protocol. It is
0xAAAA-0300-0000-88CC for LLDP.

Data LLDPDU.

FCS

Frame check sequence, a 32-bit CRC value used to determine the
validity of the received Ethernet frame.

LLDPDUs

LLDP uses LLDPDUs to exchange information. An LLDPDU comprises multiple type, length, and value

(TLV) sequences, each carrying a type of device information, as shown in

Figure 1-3

.

Figure 1-3 An LLDPDU

An LLDPDU can carry up to 28 types of TLVs, of which the chassis ID TLV, port ID TLV, TTL TLV, and

end of LLDPDU TLV (end TLV in the figure) are mandatory TLVs that must be carried and other TLVs

are optional.

TLVs

TLVs are type, length, and value sequences that carry information elements, where the type field

identifies the type of information, the length field indicates the length of the information field in octets,

and the value field contains the information itself.

LLDPDU TLVs fall into these categories: basic management TLVs, organizationally (IEEE 802.1 and

IEEE 802.3) specific TLVs, and LLDP-MED (media endpoint discovery) TLVs. Basic management TLVs

are essential to device management. Organizationally specific TLVs and LLDP-MED TLVs are used for

enhanced device management; they are defined by standardization or other organizations and thus are

optional to LLDPDUs.

1) Basic management TLVs

Table 1-1

lists the basic management TLV types currently in use. Some of them are mandatory to

LLDPDUs, that is, must be included in every LLDPDU.

Table 1-3 Basic LLDP TLVs

Type

Description

Remarks

Chassis ID

Bridge MAC address of the sending device.

Mandatory

This manual is related to the following products: