H3C Technologies H3C S3600 Series Switches - Manual (Page 1062)

1-11
To do… Use the command… Remarks
Configure the destination IP
address
destination-ip ip-address
Required
You can configure an IP address
or a host name.
By default, no destination address
is configured.
Configure dns-server dns-server ip-address
Required when you use the
destination-ip command to
configure the destination address
as the host name.
By default, no IP address of the
DNS server is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP address
is configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the number of
probes per test
count times
Optional
By default, each test makes one
probe.
Configure a test description description string
Optional
By default, no description
information is configured.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum number
is 50.
Enable history record history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record history keep-time
keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and
the maximum number of
retained statistics information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is
120 minutes and up to two pieces
of statistics information can be
retained.
Configure the retaining time of
statistics information statistics keep-time
keep-time
Optional
By default, the retaining time of
statistics information is 120
minutes.
Configure test start time and
lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now }
lifetime lifetime Optional
By default, no test start time and
lifetime is configured.
Enable routing table bypass sendpacket passroute
Optional
By default, routing table bypass is
disabled.