H3C Technologies H3C S3600 Series Switches - Manual (Page 64)

3-8
Telnet Configuration with Authentication Mode Being Scheme
Configuration Procedure
Follow these steps to configure Telnet with the authentication mode being scheme:
To do… Use the command… Remarks
Enter system view system-view —
Enter the
default ISP
domain view
domain domain-name
Configure the
AAA scheme
to be applied
to the domain
scheme { local | none |
radius-scheme
radius-scheme-name
[ local ] | hwtacacs-scheme
hwtacacs-scheme-name
[ local ] }
Configure
the
authenticati
on scheme
Quit to
system view
quit
Optional
By default, the local AAA scheme is
applied. If you specify to apply the
local AAA scheme, you need to
perform the configuration
concerning local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
Perform AAA&RADIUS
configuration on the switch. (Refer
to the AAA part for more.)
Configure the user name and
password accordingly on the AAA
server. (Refer to the user manual of
AAA server.)
Create a local user and enter
local user view
local-user user-name No local user exists by default.
Set the authentication
password for the local user password { simple | cipher }
password
Required
Specify the service type for
VTY users service-type telnet [ level
level ]
Required
Quit to system view quit —
Enter one or more VTY user
interface views user-interface vty
first-number [ last-number ]
—
Configure to authenticate
users locally or remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to authenticate
users locally or remotely.
Users are authenticated locally by
default.
Configure the command level
available to users logging in
to the user interface
user privilege level level
Optional
By default, commands of level 0 are
available to users logging in to the
VTY user interfaces.
Configure the supported
protocol protocol inbound { all | ssh
| telnet }
Optional
Both Telnet protocol and SSH
protocol are supported by default.
Make terminal services
available
shell
Optional
Terminal services are available in
all use interfaces by default.