H3C Technologies H3C S3600 Series Switches - Manual (Page 19)

1-3
Figure 1-3 Connection description
3) Then, the Connect To window as shown in Figure 1-4 appears. Select the serial port you want to
use from the Connect using drop-down list, and then click OK.
Figure 1-4 Specify the serial port used to establish the connection
4) The COM1 Properties window as shown in Figure 1-5 appears. On the window, set Bits per
second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None. Click
OK.