H3C Technologies H3C S3600 Series Switches - Manual (Page 978)

1-4
Module name Description
NTP Network time protocol module
OSPF Open shortest path first module
PKI Public key infrastructure module
RDS Radius module
RMON Remote monitor module
RSA Revest, Shamir and Adleman encryption module
SHELL User interface module
SNMP Simple network management protocol module
SOCKET Socket module
SSH Secure shell module
SYSMIB System MIB module
TAC HWTACACS module
TELNET Telnet module
TFTPC TFTP client module
VLAN Virtual local area network module
VRRP Virtual router redundancy protocol module
VTY Virtual type terminal module
XM XModem module
default Default settings for all the modules
To sum up, the major task of the information center is to output the three types of information of the
modules onto the ten channels in terms of the eight severity levels and according to the user’s settings,
and then redirect the system information from the ten channels to the six output destinations.
System Information Format
The format of system information varies with the output destinations.
z If the output destination is console, monitor terminal, logbuffer, trapbuffer, or SNMP, the system
information is in the following format:
timestamp sysname module/level/digest: - unitid –content
z The space, the forward slash /, and the colon are all required in the above format.
z Before may have %, “#, or * followed with a space, indicating log, alarm, or debugging
information respectively.
Below is an example of the format of log information to be output to a monitor terminal: