H3C Technologies H3C S3600 Series Switches - Manual (Page 539)

2-23
HWTACACS Configuration Task List
Complete the following tasks to configure HWTACACS:
Task Remarks
Creating a HWTACACS Scheme Required
Configuring TACACS Authentication Servers Required
Configuring TACACS Authorization Servers Required
Configuring TACACS Accounting Servers Optional
Configuring Shared Keys for RADIUS Messages Optional
Configuring the Attributes of Data to be Sent to TACACS
Servers
Optional
Configuring the
TACACS client
Configuring the Timers Regarding TACACS Servers Optional
Configuring the
TACACS server
Refer to the configuration of TACACS servers. —
Creating a HWTACACS Scheme
The HWTACACS protocol configuration is performed on a scheme basis. Therefore, you must create a
HWTACACS scheme and enter HWTACACS view before performing other configuration tasks.
Follow these steps to create a HWTACACS scheme:
To do… Use the command… Remarks
Enter system view system-view —
Create a HWTACACS scheme
and enter its view hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no HWTACACS
scheme exists.
The system supports up to 16 HWTACACS schemes. You can delete a HWTACACS scheme only
when it is not referenced.
Configuring TACACS Authentication Servers
Follow these steps to configure TACACS authentication servers:
To do… Use the command… Remarks
Enter system view system-view —
Create a HWTACACS scheme
and enter its view hwtacacs scheme
hwtacacs-scheme-name
Required
By default, no HWTACACS
scheme exists.