H3C Technologies H3C S3600 Series Switches - Manual (Page 424)

4-19
Configuration Use the command... Remarks
Display the information about
PIM interfaces display pim interface [ interface-type
interface-number ] Available in
any view
Display the information about
PIM neighbor routers display pim neighbor [ interface
interface-type interface-number ] Available in
any view
Display BSR information display pim bsr-info
Available in
any view
Display RP information display pim rp-info [ group-address ]
Available in
any view
PIM Configuration Examples
PIM-DM Configuration Example
Network requirements
z Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire PIM domain operates in the dense mode.
z Host A and Host C are multicast receivers in two stub networks.
z Switch D connects to the network that comprises the multicast source (Source) through
VLAN-interface 300.
z Switch A connects to stub network N1 through VLAN-interface 100, and to Switch D through
VLAN-interface 103.
z Switch B and Switch C connect to stub network N2 through their respective VLAN-interface 200,
and to Switch D through VLAN-interface 101 and VLAN-interface 102 respectively.
z IGMP is required on Switch A, Switch B, Switch C, and hosts in N1 and N2. Switch B is the IGMP
querier on the multi-access subnet.