H3C Technologies H3C S3600 Series Switches - Manual (Page 559)

1-4
To do… Use the command… Remarks
Enter system view system-view —
Specify the access protocol
web-authentication protocol { http |
https server-policy policy-name }
Required
HTTP is used by
default.
z You must configure this command before enabling Web authentication. That is, after enabling Web
authentication, you cannot change the access protocol for Web authentication.
z The SSL server policy must exist and, after the HTTPS access configuration, must not be removed.
Customizing Web Authentication Pages
The Web authentication device supports customizing authentication pages in the following ways:
z Use the default page framework and customize page elements as described in Customizing Page
Elements .
z Edit HTML files to push pictures, advertisements and the like to users. Refer to Customizing
Authentication Pages and Editing an Authentication Page File .
Customizing Page Elements
The default Web authentication page is a frame, which consists of four parts. The device allows you to
customize the four parts in form of text strings.
Follow these steps to customize Web authentication page elements:
To do… Use the command… Remarks
Enter system view system-view —
Customize the Web
authentication page elements
web-authentication
customize { corp-name
corporation-text | email
email-string | phone-num
phonenum-string |
platform-name platform-text }
Optional
By default, there is no
customized information on Web
authentication pages.
The web-authentication customize command is used to customize part of the information provided on
the default authentication page. You cannot change the overall style of the authentication page. This is
applicable to simple authentication pages.