H3C Technologies H3C S3600 Series Switches - Manual (Page 161)

1-1
1
Port Basic Configuration
When performing basic port configuration, go to these sections for information you are interested in:
z Ethernet Port Configuration
z Ethernet Port Configuration Example
z Troubleshooting Ethernet Port Configuration
z The configuration of flow control on Ethernet ports is added. For the detailed configuration, refer to
Configuring Flow Control on a Port.
z The configuration of loopback port auto-shutdown and loopback detection on Ethernet ports in bulk
is added. For the detailed configuration, refer to Configuring Loopback Detection for an Ethernet
Port.
z The configuration of the support for the kbps keyword in storm suppression thresholds is added.
For the detailed configuration, refer to Configuring Storm Control on a Port.
Ethernet Port Configuration
Initially Configuring a Port
Follow these steps to initially configure a port:
To do... Use the command... Remarks
Enter system view system-view —
Enter Ethernet port view
interface interface-type
interface-number
—
Enable the Ethernet port undo shutdown
Optional
By default, the port is enabled.
Use the shutdown command to
disable the port.
Set the description string
for the Ethernet port
description text
Optional
By default, the description string of an
Ethernet port is null.
Set the duplex mode of
the Ethernet port
duplex { auto | full | half }
Optional
The optical interface of an SFP port
does not support the half keyword
By default, the duplex mode of the
port is auto (auto-negotiation).