H3C Technologies H3C S3600 Series Switches - Manual (Page 946)

1-9
File Backup and Restoration
Configuration prerequisites
Before performing the following operations, you must first ensure that:
z The relevant units support TFTP client.
z The TFTP server is started
z A route exists between the TFTP server and TFTP client.
Configuration procedure
Follow these steps to back up and restore configuration file:
To do… Use the command… Remarks
Back up the current
configuration of a specified unit
backup unit unit-id
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
Optional
Available in user view
Back up the current
configuration of the whole
fabric system
backup fabric
current-configuration to
{ dest-addr | dest-hostname }
filename.cfg
Optional
Available in user view
Restore the startup
configuration of a specified unit
restore unit unit-id
startup-configuration from
{ source-addr |
source-hostname }
filename.cfg
Optional
Available in user view
Restore the startup
configuration of the whole
fabric system
restore fabric
startup-configuration from
{ source-addr |
source-hostname }
filename.cfg
Optional
Available in user view