beautypg.com

Configuring multicast vlan – H3C Technologies H3C S3600 Series Switches User Manual

Page 464

background image

6-15

It is not recommended to configure this function while the multicast VLAN function is in effect.

Configuring Multicast VLAN

In traditional multicast implementations, when users in different VLANs listen to the same multicast

group, the multicast data is copied on the multicast router for each VLAN that contains receivers. This is

a big waste of network bandwidth.

In an IGMP Snooping environment, by configuring a multicast VLAN and adding ports to the multicast

VLAN, you can allow users in different VLANs to share the same multicast VLAN. This saves bandwidth

because multicast streams are transmitted only within the multicast VLAN. In addition, because the

multicast VLAN is isolated from user VLANs, this method also enhances the information security.

Multicast VLAN is mainly used in Layer 2 switching, but you must make the corresponding

configurations on the Layer 3 switch.

Follow these steps to configure multicast VLAN on the Layer 3 switch:

To do...

Use the command...

Remarks

Enter system view

system-view

Create a multicast VLAN and
enter VLAN view

vlan vlan-id

Return to system view

quit

Enter VLAN interface view

interface Vlan-interface
vlan-id

Enable IGMP

igmp enable

Required

By default, the IGMP feature is
disabled.

Return to system view

quit

Enter Ethernet port view for the
Layer 2 switch to be configured

interface interface-type
interface-number

Define the port as a trunk or
hybrid port

port link-type { trunk |
hybrid }

Required

port hybrid vlan vlan-id-list
{ tagged | untagged }

Specify the VLANs to be
allowed to pass the Ethernet
port

port trunk permit vlan vlan-list

Required

The multicast VLAN defined on
the Layer 2 switch must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN
if the port type is hybrid.

Follow these steps to configure multicast VLAN on the Layer 2 switch:

To do...

Use the command...

Remarks

Enter system view

system-view

Enable IGMP Snooping

igmp-snooping enable

This manual is related to the following products: